Undercoating M80 - Repaintable

40x0_Colad_Undercoating_M80%20Black%20White%20%26%20Grey_1.jpg

Undercoating with anti-corrosion and noise reduction properties. Material made of rubber and resins. After drying, the coating
is paintable.

The coating offers excellent protection against climatic influences and against gravel and stone chips. 1 L tin with spray connection (suitable for +/- 2.5 m2).

Colour black. 1 L.

Art.no.	Variant
4010	Black
4020	White
4030	grey

EAN code

8714247001448

Downloads

Frequently Asked Questions

Shake before use. The surfaces to be treated must be clean, dry, rust-, dust- and grease free. Can be applied by an Undercoating Spray Gun with an air-pressure of 3-6 bar. Recoated without bleeding. Over-painted (depending on the layer thickness, temperature and humidity), after about 60 to 90 minutes, with most of the commonly used conventional 2K- and base coat lacquers. When a 2Klacquer is used, we advise to first use a layer of primer and to paint over after this layer has completely dried. Optimum spraying distance: 30cm Cleaning contaminated surfaces and equipment: in ‘fresh’ condition with solvents.

Over-painted (depending on the layer thickness, temperature and humidity), after about 60 to 90 minutes, with most of the commonly used conventional 2K- and base coat lacquers. When a 2Klacquer is used, we advise to first use a layer of primer and to paint over after this layer has completely dried.

Salt spray test (DIN 50021) Up to 480 hours, Ri 0 at 350 μ dry layer thickness Up to 720 hours, Ri 0 at 350 μ dry + paint Gravel test (SAE-J400 method) 6A – 6B at 350 μ dry layer thickness Bending test (DIN 53152, +70°C) No cracks, no loss of adhesion Bending test (DIN 53152, -30°C) Minor cracks, no loss of adhesion

Undercoating M80 black - Repaintable

Downloads

Contact Form